gate valve

*

Gate Valve - 2 inch FPT X 2 inch FPT

2-1/2" Solder Ends Gate Valve Features: Full Port Cast Brass Non-rising Stem Threaded Bonnet Solder Ends Conform to ANSI Standards B16.18 Complies w/ NSF-61 for Low Lead ...

4" Heavy Pattern Brass Gate Valve with Hard Seat - IPSOther Product Features:300 WOG/150 WSPISO 9001:2000Note: Image may slightly differ than actual product

1/2"

1" Heavy Pattern Brass Gate Valve with Hard Seat - IPSOther Product Features:300 WOG/150 WSPISO 9001:2000Note: Image may slightly differ than actual product

Danze D560158 Parma Two Handle Thermostaticstatic Shower Valve With Trim An elegant intersection of cylindrical shapes, Parma is clearly for the aesthetically adventurous.

Non-rising stem. Solid wedge disc. 200 psi WOG. Meets California Prop. 65 Drinking Water Standards and ANSI/NSF 61-8.

1/2" Copper x Copper Solid Disc Gate Valve, 125#.

Gate Valves, referred to as knife valves by some, are easier to use than a ball valve for fully opened or closed operation. They are not used for regulating flow.

WASTEGATESSS acturator springs for consistent pressure even at high temperaturesCNC machined flanges from 304 stainless steel measuring 12mm thick347 stainless steel alloy valves ...

VALVE GATE SLIP X SPIGOT 2IN MP - 4-25-0049

BRONZE GATE VALVE - 1-1/2" - V1615High Quality 1.5" Bronze Gate Valve.

by Jack Lewin

Screw in bonnet, non rising stem, solid wedge and wheel handles. Conforms to MSS SP-80. 125 psi stem. 200 psi water, oil or gas.