8" 3-ohm Component Subwoofer polypropylene W-Cone with polyester foam surround,23-250 Hz frequency response,150-500 watts RMS power range

12" 4 ohm Component Subwoofer polypropylene cone with foam surround,100-300 watts RMS power range,top-mount depth: 6-1/4"

13.5" 3-ohm Component Subwoofer mica-filled polypropylene cone with Santoprene rubber surround,20-200 Hz frequency response,100-600 watts RMS power range

mineral-filled polypropylene cone with nitrile-butylene rubber surround,22-200 Hz frequency response,100-500 watts RMS power range

6.5" 4-ohm Component Subwoofer mineral-filled polypropylene cone with nitrile-butylene rubber surround,30-300 Hz frequency response,40-150 watts RMS power range

12" 4-ohm Component Subwoofer mineral-filled polypropylene cone with nitrile-butylene rubber surround,22-200 Hz frequency response,100-500 watts RMS power range

13.5" Single 3-ohm Hatchback Subwoofer sealed enclosure with one 13.5" W7 woofer,power handling: 500-1,500 watts RMS,frequency response: 15-200 Hz

150 watts RMS x 2 at 3 to 8 ohms,speaker- and preamp-level inputs,variable high- and low-pass filters (50-5000 Hz, 12 or 24 dB/octave)

13.5" Dual 4ohm Voice Coil Component Sub polypropylene W-Cone with polyester foam surround,18-200 Hz frequency response,200-750 watts RMS power range

150 Watts x 4 1.5-4 ohms 150 watts RMS x 4 (1.5 - 4 ohms per channel),speaker- and preamp-level inputs,variable high and low pass filter (50-500 Hz, 12 or 24dB/octave)

100W x 4 + 500W x 1 Car Amplifier 150 watts RMS x 2 bridged + 500 watts RMS x 1,preamp and speaker-level inputs,variable high- and low-pass filters (50-500 Hz, 12 or 24dB/octave)

1000 watts RMS x 1 Car Amplifier 1,000 watts RMS x 1 at 1.5 to 4 ohms,speaker- and preamp-level inputs,variable low-pass filter (40-200 Hz, 12 or 24 dB/octave)

6.5" 8-ohm Component Subwoofer mineral-filled polypropylene cone with nitrile-butylene rubber surround,30-300 Hz frequency response,40-150 watts RMS power range

Remote Bass Control remote bass control for JL Audio A-Series, G-Series and Slash v2 amplifiers (except the 300/2v2 and the 300/4v2),allows variable (0-12 dB) bass boost in JL ...

polypropylene W-Cone with polyester foam surround,23-250 Hz frequency response,150-600 watts RMS power range