subwoofer

three solid 6.1% silver conductors,active Dielectric Bias System eliminates cable "break in" period for consistent performance,air tube insulation

You need a cable specifically for your subwoofer, but you need more of the good stuff, like the higher silver content (2.5-percent) found in the Sub-1.

two solid long-grain copper conductors * 24k gold-plated RCA connectors * built-in ground wire with spade lugs *

Symmetrical Conductors Solid Long-Grain Copper Optimized Gold-Plating PVC Insulation

Single cable with a separate chassis ground connector at both ends. Foamed PE dielectric Symmetrical coax geometry Multi color braid Solid 1.25% silver metal

RCA terminations 22 AWG gauge Clear over black jacket Solid LGC metal Single cable with a separate chassis ground connector at both ends.

AudioQuest wasn't messing around when they created the Sub3. Bearing AudioQuest's highest silver content (6.1-percent), the Sub3 delivers the cleanest signal yet.

Foamed PE dielectric RCA terminations Solid 1.25% silver metal 22 AWG gauge Symmetrical coax geometry

three solid 6.1% silver conductors * Dielectric-Bias System with attached battery pack (batteries included) maintains constant 36V charge for optimal performance * 100% coverage ...

SUB-1 uses three solid 2.5% Silver conductors inside PE Air Tubes. Solid conductors eliminate strand-interaction distortion.

Triple Balanced Solid 2.5% Silver Welded Plugs PE Air-Tubes

Symmetrical Conductors Solid 1.25% Silver Optimized Gold-Plating Foamed PE Insulation

PVC dielectric Symmetrical coax geometry Solid LGC metal Clear over black jacket 22 AWG gauge

two solid 1.25% silver conductors * foam insulation for positive conductor * 24k gold-plated RCA connectors * built-in ground wire with spade lugs *

three solid 2.5% silver silver-plated RCA connectors,air tube insulation